Solutions / MLFF Tolling

Barrier-free tolling that identifies every vehicle at road speed.

Multi-lane free flow (MLFF) tolling removes the booth and the barrier, so traffic does not stop. The toll system reads the FASTag and the number plate of each vehicle. One Recon camera for each lane supplies the plate read and the image evidence, day and night.

What free flow needs

What a barrier-free gantry asks of the camera

Free flow ends the queue at the toll plaza. The toll system still needs a correct record of each vehicle.

A sharp plate at road speed

Vehicles do not slow down. The camera captures a sharp plate, free of skew, in one pass.

Every lane position

Vehicles change lanes under the gantry and drive on the lane line. The cameras cover the full width of the road.

The same read at night

Much of the traffic on a highway moves after dark. Headlight glare and dark vehicles do not stop the plate read.

A record that stands as evidence

No toll collector sees the vehicle. The image record identifies the vehicle and supports an e-notice.

How it works

From gantry to toll record

The toll system reads the FASTag and the plate of each vehicle. Recon supplies the plate read and the image evidence.

  1. The vehicle enters the lane

    The camera for that lane detects the vehicle and captures it at up to 60 frames per second.

  2. Recon reads the plate

    The camera reads the plate on the device and records the vehicle class, the time and the lane.

  3. The record goes to the toll system

    Each passage becomes one record with a plate image and a vehicle image, sent to the toll system over an API.

  4. Toll or e-notice

    The toll system matches the record to the FASTag read and charges the toll, and if the payment fails, the plate and the images support an e-notice.

2.3MPGlobal shutter sensor
60FPSCapture rate
2×Exposures at night
1per laneRecon camera
850nmBuilt-in IR lighting
How Recon handles free flow

Four design choices for a barrier-free gantry

A car in one highway lane, seen by the Recon camera above that lane

One camera for each lane

  • Each Recon camera covers one lane
  • The lens puts the pixels of the sensor on the vehicle and the plate, not on the road around them
  • The global shutter exposes the whole frame at once, so a moving plate has no skew
Two night frames of one car from the same Recon camera: a dark frame with a readable plate, and a brighter frame that shows the vehicle

Two exposures of every vehicle at night

  • The camera alternates two exposures, frame by frame
  • The plate exposure is short, so the plate is sharp and headlights do not wash it out
  • The scene exposure is longer, so the vehicle and the lane are visible
  • One evidence record holds both
One car on the lane line at night, with its plate in view of two adjacent Recon cameras

Vehicles between lanes

  • Adjacent cameras overlap at the lane line
  • A vehicle that drives on the line is in view of both cameras
  • A lane change under the gantry does not hide the plate
An electric car with a green plate, captured by a Recon camera

The plate is read on the camera

  • Recon detects and reads the plate on the device
  • It reads private, commercial and electric vehicle plates, on one line or two
  • The gantry needs no video server for plate reading
  • The camera keeps records locally if the network link drops

Images: captured by Recon cameras on a live highway. The last two plate characters are masked and windscreens are blurred.

The megapixel question

Is 2.3 MP enough for free-flow tolling?

Yes. A plate read depends on the number of pixels across the plate. It does not depend on the megapixel figure of the sensor.

The field of view decides how many pixels reach the plate. One Recon camera covers one lane, so the full width of the sensor covers about one lane. If a camera with a similar sensor width covers two lanes, the same plate gets about half the pixels.

Pixel count is one of three conditions. The plate must also be free of skew and free of motion blur. The global shutter removes skew. A short exposure with IR lighting removes blur, by day and at night.

When you compare cameras for an MLFF project, ask for the pixels across the plate at your mounting height and read distance.

Lane 1 Lane 2 Lane 3 One Recon for each lane The sensor width covers one lane. The plate gets the full share of pixels. Lane 1 Lane 2 Lane 3 One camera across two lanes The same sensor width covers two lanes. The plate gets about half the pixels.
Number plate cropped from a Recon frame in daylight, last two characters masked
Number plate cropped from a Recon frame in daylight, last two characters masked
Number plate cropped from a Recon frame in daylight, last two characters masked
Number plate cropped from a Recon frame in daylight, last two characters masked
Number plate cropped from a Recon frame in daylight, last two characters masked
Number plate cropped from a Recon frame in daylight, last two characters masked
Number plate cropped from a Recon frame in daylight, last two characters masked
Number plate cropped from a Recon frame in daylight, last two characters masked
Number plate cropped from a Recon frame at night, last two characters masked
Number plate cropped from a Recon frame at night, last two characters masked
Number plate cropped from a Recon frame at night, last two characters masked
Number plate cropped from a Recon frame at night, last two characters masked
Two-wheeler number plate cropped from a Recon frame in daylight, last two characters masked
Two-wheeler number plate cropped from a Recon frame in daylight, last two characters masked
Two-wheeler number plate cropped from a Recon frame in daylight, last two characters masked
Two-wheeler number plate cropped from a Recon frame at night, last two characters masked
Plates cropped from full Recon frames on a live highway, by day and at night: cars, a commercial vehicle, an electric car and two-wheelers with two-line plates. No enhancement. The last two characters are masked.
Certifications

Tested and certified in India

NATRAX

Speed detection certified up to 230 kmph

STQC

Independently certified for security assurance

BIS

Bureau of Indian Standards certified

Make in India

Designed, engineered, and manufactured in India

Frequently asked questions

Common questions about MLFF and ANPR

What is MLFF tolling?

Multi-lane free flow (MLFF) tolling collects the toll while vehicles drive under a gantry at road speed. There is no booth and no barrier. A FASTag reader identifies the tag, and ANPR cameras read the number plate.

Why does MLFF need ANPR if vehicles have FASTag?

MLFF identifies each vehicle in two ways: the FASTag and the number plate. The plate read lets the toll system check that the tag and the vehicle match. It also identifies a vehicle whose tag is missing, damaged or blacklisted, and it gives the image evidence for an e-notice.

Is a 2.3 MP camera enough for MLFF tolling?

Yes. A plate read depends on the number of pixels across the plate, not on the megapixel figure. Each Recon camera covers one lane, so the lens puts the pixels of the sensor on the plate and not on the road around it. The global shutter keeps the plate free of skew, and a short exposure with IR lighting keeps it sharp at night.

How many ANPR cameras does an MLFF gantry need?

Stellarview uses one Recon camera for each lane. Adjacent cameras overlap at the lane line, so a vehicle that changes lanes stays in view. A site survey confirms the count for shoulders and wide lanes.

How does Recon read plates at night?

At night Recon alternates two exposures, frame by frame. A short exposure with IR lighting gives a sharp plate that headlights do not wash out. A longer exposure shows the vehicle and the lane. One evidence record holds both.

Why use a global shutter camera for free-flow tolling?

A rolling shutter exposes the frame line by line, so a moving plate comes out skewed. A global shutter exposes the whole frame at the same instant. The plate keeps its shape at road speed, which makes the characters easier to read.

Does the gantry need a server to read plates?

No. Recon reads the plate on the camera and sends the record to the toll system. The camera keeps records locally if the network link drops.

Which plate types does Recon read?

Recon reads private, commercial and electric vehicle plates, in single-line and two-line layouts. This covers cars, trucks, buses, autos and two-wheelers.

Does Recon also classify vehicles?

Yes. Recon records the vehicle class with every passage. For axle-based toll classes, add ATCC on the same gantry.

Plan your MLFF gantry with us

Send us the lane count, the mounting height and the read distance. We propose the camera layout and show you sample evidence records.